Mobotix Mx-A-SPA-HR

The MxSplitProtect Installation Box (Mx-A-SPA) compatible mounting rail with integrated protection 4 kV span (for 35 mm rail) (type 2 P4) for connecting two IP camera / PoE devices via an Ethernet cable.

• Interfaces: 3x RJ45 for Ethernet 100Base-T, 1x terminal for shielding
• Only to be used in protected areas (Indoor)
• Ambient temperature: 0 to 40 ° C

If you want to connect two PoE-powered network devices (eg two MOBOTIX cameras) with MxSplitProtect via one Ethernet installation cable with power supply (usually in the switch cabinet), the DIN rail module MxSplitProtectHR is required.

It transmits data and power from the two PoE ports (only four wires are used for this) to the eight wires of the installation cable, which are then distributed to the two RJ45 ports MxSplitProtect installation box. MxSplitProtectHR offers the same split function and 4 kV surge protection as MxSplitProtect, but is not weatherproof. Also available for the connection of the Ethernet patch cable RJ45 connection instead of an LSA terminal because the wires of the installation cable are usually only introduced on a patch panel in the switch cabinet, and then connected via patch cable with RJ45 plug to MxSplitProtectHR.